Henderson Elite Windows provides professional french doors in Henderson, NV for residential and commercial properties across the Las Vegas Valley. French doors are the best-looking way onto a patio and the easiest to hang badly, and a pair that goes in even slightly out of square will tell on itself within two summers. The astragal stops meeting in the middle, the flush bolts miss their strikes, dust blows straight through the centre joint, and the lock only engages if you put a shoulder into it. A French door is a hinged pair: an active leaf you use daily and an inactive leaf held by flush bolts top and bottom, with an astragal, the vertical strip, closing the gap between them. Everything that goes wrong goes wrong at that centre joint, because it is the only place in the opening with no frame behind it. Hang the pair slightly out of true and the two leaves stop meeting parallel, the astragal seal touches at one end only, the flush bolts drift out of their strikes, and the weight of the active leaf slowly pulls the top corner further out. Multi-point locking hardware is the best defence, because it draws the leaf tight at the head, the jamb and the sill instead of at one point, and it keeps a tall door flat through a lot of thermal movement. Swing direction is a decision worth making deliberately rather than accepting from a catalogue. Inswing pairs keep the hardware and weatherstrip protected, clear the patio furniture, and are less likely to be caught by weather. Outswing pairs free up interior floor space, shed water better, and are pressed into their weatherstrip by wind rather than blown off it, which is a real advantage on an exposed elevation. The trade is that an outswing pair standing open when a monsoon gust front arrives is exactly how hinge arms and top corners get bent, so specify a proper hold-open and use it, and put non-removable hinge pins on the outside for security. Where the opening is too narrow for a true pair, a single French door with fixed sidelites gives the same look with a much simpler install. The sill is where French doors leak, so it is where the time goes. An adjustable, rot-proof composite sill over a proper pan and flashing sheds water instead of collecting it, and driven monsoon rain will find a bare threshold sitting on nothing. Glass is tempered in every lite because the code requires it in doors, with laminated available where you want sound reduction, forced-entry resistance and extra ultraviolet rejection on a patio elevation that gets full afternoon sun. Simulated divided lites with spacer bars between the panes give the muntin shadow line that architectural review usually wants, and we build in clad-wood, fiberglass and vinyl so the doors match the window package rather than fighting it. Interior French doors are a different and much cheaper animal: a home office, a den or a casita conversion where you want light and separation and are not worried about sound. People underrate them. We also straighten out pairs somebody else hung. A sagging pair is usually a hinge, shim and strike problem rather than a door problem, and re-hanging, resetting the flush bolts and replacing the astragal and sweep will fix a door most companies would rather replace. Ask us to look at what you have before you buy new ones.
With 20+ years of experience, our licensed and insured team brings the right materials and equipment to every job — spectrally selective low-E coatings, argon-filled insulated glass units, warm-edge spacer systems, UV-stabilised vinyl and pultruded fiberglass frames, thermally broken aluminum framing, NFRC-labeled U-factor and SHGC ratings — and backs the work with a written workmanship warranty. We serve Henderson and nearby communities including Las Vegas, North Las Vegas, Boulder City, Paradise.
What We Handle
Everything our french doors in Henderson covers
One crew, one point of contact, and the full range of french doors work in Henderson, NV. If it is on this list we do it in house rather than handing it to a subcontractor:
- French doors
- French patio doors
- interior French doors
- French door installation
- French door replacement
- Inswing and outswing hinged pairs with an active and an inactive leaf, plus astragal and flush-bolt hardware
- Single French doors with fixed sidelites where the opening is too narrow for a true pair
- Multi-point locking hardware engaging at head, jamb and sill, which is what keeps a tall leaf flat over time
- Adjustable, rot-proof composite sills with a proper pan and flashing underneath
- Tempered safety glass in every lite as the code requires for doors, with laminated available for sound and security
- Simulated divided lites and grille patterns matched to the window package and to architectural review
- Clad-wood, fiberglass and vinyl frames so the doors and the windows read as one design
- Interior French doors for home offices, dens and casita conversions where light matters more than sound
- Sag and alignment correction on existing pairs, usually a hinge, shim and strike problem rather than a door problem
- Weatherstrip, astragal and sweep replacement to stop the draught down the middle of a pair
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Henderson services.
Materials, equipment and how we do french doors
The difference between french doors that lasts and french doors that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with spectrally selective low-E coatings, argon-filled insulated glass units, warm-edge spacer systems, UV-stabilised vinyl and pultruded fiberglass frames, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Henderson job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 20+ years of window work in the Las Vegas Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do french doors outside Henderson
Henderson Elite Windows covers Henderson and the surrounding communities of the Las Vegas Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- French Doors in Las Vegas, NV — the Clark County seat, founded in 1905 along the San Pedro, Los Angeles and Salt Lake Railroad, population 641,903 at the 2020 census, which makes it the largest city in Nevada
- French Doors in North Las Vegas, NV — Clark County, incorporated in May 1946, population 262,527 at the 2020 census, spread across a wide, fast-growing footprint on the north end of the valley
- French Doors in Boulder City, NV — Clark County, built by the federal government in the 1930s to house Hoover Dam workers, population 14,885 at the 2020 census, in one of only two Nevada municipalities that prohibit gambling
- French Doors in Paradise, NV — Clark County, an unincorporated town rather than a city, population 191,238 at the 2020 census, which would rank it among the largest communities in the state if it were incorporated
- French Doors in Spring Valley, NV — Clark County, an unincorporated town on the west side of the valley, population 215,597 at the 2020 census, built out mostly between the 1980s and the 2000s
- French Doors in Enterprise, NV — Clark County, an unincorporated town on the southern edge of the valley, population 221,831 at the 2020 census, making it one of the fastest-growing communities in Nevada
Start on the Henderson Elite Windows homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Henderson Chooses Henderson Elite Windows
- ✓Over 20 years replacing windows and glass across the Las Vegas Valley
- ✓Residential and commercial, from tract homes to retail storefronts and office glazing
- ✓In-house installers, never subcontractors you have never met
- ✓Glass packages built around solar heat gain coefficient, which is the number that matters in the Mojave
Every french doors project in Henderson gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free french doors free estimate in Henderson, or request a quote and we'll get right back to you.